The height of the mesh on the retractable baby gate is about 87.5 cm and the total height to the top of the lock is just under 96 cm. You would need to ensure there are enough clearance space where the gate is going to be installed so that you can not only install the gate but also have easy access to the childlock mechanism. The gate also needs to sit on a flat surface for proper operation.
When completely retracted, Retract-A-Gate only protrudes less than 9 cm from the wall. This makes it fairly flexible where you choose to install your wall brackets without the need to worry about the gate blocking the way. For example, for a typical doorway, you can choose to install directly within the doorway, or, in the event, you don't have the 6.5 cm necessary to mount your Universal Brackets in the doorway, the brackets can also mount around the corner of the doorway, either on the door molding or on the wall as long as you do not exceed the maximum distance it can cover.
If there are baseboards/skirtings where you will be installing your Retract-A-Gate, you need to measure the height and thickness of your baseboard/skirtings to determine if you will need wall spacers and how many you would need. For more information on when Spacers would be necessary and useful, check out "FAQ: Do I need spacers?".
Typically these are scenarios that spacers would be necessary:-
Absolutely! A nice advantage of Retract-A-Gate Safety Gate is that it can be installed on a diagonal & work at pretty much ANY ANGLE, opening up numerous mounting options. This is just one of the many great retractable baby gate features which few if any other baby safety gates on the market have.
You can also diagonally attach Retract-A-Gate Safety Gate to a wall farther away from the top of the stairs in order to help keep it back the recommended 6 inches.
For the best security with an angled installation, the openings of the brackets should face away from the Retract-A-Gate.
Retract-A-Gate retractable gates are designed to be easy to install, however, proper installation of the gate is still very important to ensure that the gates are secured and safe.
To make your installation easy, these tools would be essential:-
The measuring tape is primarily used in to determine if a gate is suitable for you.
You would need a measuring tape to confirm the distance of the area you intend to cover using the Retract-A-Gate. The distance should definitely be less than the maximum length of your gate you plan to get. Either 132cm (52" gate) or 182cm (72" gate).
It is also crucial to determine if there are suitable places to secure the Universal Brackets to.
Phillips Screw Driver
The Smart Retract Retract-A-Gate is secured using 4 screw mounted Universal brackets.
For installation, you would need a phillips or "cross head" screw driver for use with #6 size screws.
An electric screw driver while not necessary can make installation even faster & easier.
Get a pencil handy when you start to install your gate. You will need it to help mark locations for the Universal Brackets and drilling locations.
To ensure the gate is nice and taut, the 2 sets of Universal brackets on opposite sides of the Retract-A-Gate need to be parallel to each other. The spirit level is used to help achieve that.
As a hardware mount gate, the Universal Brackets needed to be secured using screws. Depending on where and what type of surfaces you are installing the Universal Brackets, you might require different set of tools. You cannot do without a power impact drill if you need to drill into concrete, bricks or dry walls.
Screw anchors for use with holes drilled into concrete, bricks or dry walls have been provided as part of all Retract-A-Gates (Southeast Asia version).
There are many alternative surfaces that the Retract-A-Gate can be mounted to. Some of the more common ones are listed below along with what you need to consider for that surface.
Bookcase or cabinet
You can mount the brackets to a bookcase only if the bookcase is stable (wall-mounted). You may need to put a backer board on the inside wall of the bookcase (or cabinet) if the wall is thin so that the screws have a minimum of 1 inch of solid wood to bite into.
If you wish to mount the Retract-A-Gate baby gate to a cabinet where there is a small counter top overhang, the wall spacers can be used under both the top and bottom brackets. The spacers should move the safety gate out away from the counter's edge to provide enough clearance to mount the baby safety gate.
Brick, stone, concrete, or mortar
You will need appropriate masonry anchors which you can purchase at any hardware store. Simply take the screws that come with Retract-A-Gate to the store and have them size an appropriate masonry anchor for you. The screws we provide are 2 inches long. If you need to use shorter screws be sure to use #6 flat head screws and use the included finishing washers. Another option would be to fasten a board to the brick/stone/concrete/mortar using similar anchors and then attach the brackets to the board.
We always recommend mounting the brackets to the support/stud behind the fiberglass as that will provide the best holding power. If there is no support then you need to use appropriate anchors or a backer board that will work with your fiberglass.
Vinyl siding on a house
You can attach the retractable baby gate wall brackets to the house siding as long as there is solid wood sheeting/boards underneath the siding (this is normally the case).
Absolutely! The Retract-A-Gate Safety Child & Pet gate has been extensively tested in wet rainy seasons and hot dry summers.
The Retract-A-Gate safety gate has also been tested outside during a full northern USA winter with flawless results. With that said, it is recommended that you bring the Retract-A-Gate inside during freezing temperatures (simply unsnap the safety gate from the brackets). Anything, including Retract-A-Gate, which is left outside will have a reduced life compared to only indoor use; but you can feel confident that the retractable safety gate will stand up well to outdoor use.
One thing to be aware of is that some fading or degradation due to extended sun exposure is possible. Because of this, we recommend bringing the Retract-A-Gate indoors when not in use.
Installing on a Trex or composite deck?
If installing outside to a Trex or composite deck, the posts will normally have a 4x4 wooden post inside them. In this application we would recommend pre-drilling your holes and using stainless steel screws the same size as the ones we provide (#6 flat head). Stainless steel will hold up much better when in contact with the treated wood posts that are normally on the inside of the Trex.
You can also attach the wall brackets to your house siding if there is solid wood underneath.